Perancangan Instalasi Pompa Doubel Inlate Pada Mesin Pencuci Piring Otomatis
DOI:
https://doi.org/10.29407/2bqs1306Abstract
Latar belakang penelitian difokuskan pada perancangan dan peningkatan instalasi pompa double inlet pada mesin pencuci piring otomatis berkapasitas 175 liter, dengan tujuan meningkatkan efisiensi proses pencucian untuk keperluan rumah tangga dan pelaku UMKM. Mesin ini mengandalkan pompa sentrifugal yang memiliki tingkat efisiensi tinggi dan mampu menghasilkan tekanan air yang optimal. Proses perancangan mencakup tahapan observasi lapangan, studi literatur, pengembangan desain teknis, pengujian alat, serta validasi oleh pakar teknik mesin. Hasil penelitian menunjukkan bahwa sistem pompa doubel inlet dapat mendistribusikan air dan deterjen secara merata melalui water spray arm, sehingga proses pencucian menjadi lebih bersih, hemat penggunaan air, dan efisien. Berdasarkan hasil perancangan, laju aliran air mencapai 13,56 liter per menit dengan tekanan keseluruhan sebesar 42,39 kPa, yang masih dalam kemampuan operasional pompa tersebut. Pemakaian selang 12 mm dinilai lebih efektif dalam meminimalkan kehilangan tekanan akibat gesekan. Inovasi ini dianggap cocok untuk digunakan dalam skala rumah tangga maupun usaha kecil seperti rumah makan dan angkringan karena dapat menghemat air, waktu, serta biaya operasional.
Keywords:
mesin pencuci piring otomatis, pompa double inlet, pompa sentrifugal, , efisiensi.##plugins.themes.default.displayStats.downloads##
References
[1] G. Venkatesh, “Dishwashers: Literature Review to Summarise the Multi-Dimensionality of Sustainable Production and Consumption,” Sustain., vol. 14, no. 16, 2022, doi: 10.3390/su141610302.
[2] T. J. Tewes, L. Harcq, P. Minot, M. Ter Bekke, and D. P. Bockmühl, “Short and sweet: Balancing energy savings and cleaning performance to identify efficient short-cycles for domestic dishwashers,” Tenside, Surfactants, Deterg., vol. 61, no. 5, pp. 399–413, 2024, doi: 10.1515/tsd-2024-2589.
[3] M. Peer-reviewed, “I Nternational J Ournal for I Nnovative R Esearch in,” vol. 03, no. 02, p. 2022, 2021, doi: 10.5281/zenodo.12163584.
[4] Mokhamad Arif Rachman Rosyidi, M. Maulidina, and M. D. M. Puspitasari, “Efektivitas Alat Pencuci Gelas Otomaris (PILOT) Berbasis Arduino Nano,” Nusant. Eng., vol. 5, no. 1, pp. 8–14, May 2022, doi: 10.29407/noe.v5i1.16769.
[5] Ms. kumar, S. Venkatarajulu, and A. Professor, “Design and Fabrication of semi-automatic Dishwasher,” vol. 7, no. 1, pp. 381–384, 2019, [Online]. Available: www.ijedr.org
[6] W. M. Rumaherang, C. F. Refwalu, C. S. E. Tupamahu, S. J. E. Sarwuna, and E. J. Rumaherang, “EVALUASI KINERJA POMPA SENTRIFUGAL BERKAPASITAS 600 KL/Hr PADA SISTEM PEMOMPAAN MINYAK,” J. Tek. Mesin, Elektro, Inform. Kelaut. dan Sains, vol. 3, no. 1, pp. 17–27, 2023, doi: 10.30598/metiks.2023.3.1.17-27.
[7] M. Hacı et al., “Development of innovative smart industrial dishwasher prototype that reduces water and detergent consumption in the washing process according to variable dishwasher capacity and types,” vol. 134, no. 4, pp. 132–134, 2021.
[8] D. Kurniawan, R. Rahmadian, F. Baskoro, and A. Widodo, “Perbandingan Efektivitas Dari Sistem Kontrol Mesin Pencuci Piring Dengan Water Spray Arm,” 2021.
[9] Siregar, “Pengaruh Variasi Sudut Keluar Impeler Terhadap Performance Pompa Sentrifugal,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 3, no. 2, pp. 166–174, 2020, doi: 10.30596/rmme.v3i2.5278.
[10] S. Nugroho, W. E. J., and D. A. Himawanto, “Pengaruh Jumlah Sudu Terhadap Unjuk Kerja dan Kavitasi Pompa Sentrifugal,” Mekanika, vol. 12, no. 2, pp. 78–83, 2014, [Online]. Available: https://jurnal.ft.uns.ac.id/index.php/mekanika/article/view/121
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Muhammad Risky, Fatkhur Rohman
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
