ANALISIS PERAWATAN BEARING UNIT CONVEYOR BREADED COOK MENGGUNAKAN METODE PREVENTIVE MAINTENANCE

Authors

  • Ishaq Yamahendra Tri Putra Universitas Nusantara PGRI Kediri Indonesia
  • Hesti Istiqlaliyah Universitas Nusantara PGRI Kediri Indonesia
  • Irwan Setyo Widodo Universitas Nusantara PGRI Kediri Indonesia

DOI:

https://doi.org/10.29407/7df39h91

Abstract

Bearing merupakan salah satu komponen penting pada sistem conveyor yang berfungsi menopang poros dan menjaga kelancaran proses perpindahan material. Kerusakan bearing dapat menyebabkan gangguan produksi, peningkatan downtime, dan menurunkan efisiensi operasional perusahaan. Penelitian ini bertujuan untuk menganalisis kondisi bearing conveyor pada unit Breaded Cook di PT Bumi Menara Internusa serta merumuskan tindakan perawatan menggunakan metode preventive maintenance. Metode penelitian yang digunakan adalah studi kasus melalui observasi lapangan, inspeksi visual bearing, dan analisis kondisi operasional conveyor. Hasil penelitian menunjukkan bahwa kerusakan bearing disebabkan oleh pelumasan yang tidak optimal, kontaminasi tepung dan minyak, suhu kerja tinggi, serta ketidaksejajaran poros. Penerapan preventive maintenance melalui inspeksi rutin, pelumasan berkala, pembersihan area bearing, dan pengecekan alignment mampu meningkatkan keandalan conveyor, mengurangi potensi kerusakan mendadak, serta memperpanjang umur pakai bearing.

Keywords:

bearing, conveyor, maintenance, preventive maintenance, production

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1]Riyadi, Slamet, “Pengembangan Aplikasi Manajemen Laporan Keuangan Dan Kegiatan

[1] A. R. Suwondo, I. M. Febrianty, dan K. A. E., “Penerapan Critical Point Pada Proses

Produksi Udang di PT Bumi Menara Internusa,” 2024.

[2] M. Khabib dan R. C. Muhamadin, “Analisis Perawatan Mesin Conveyor Batubara di PT

X,” ENIGMA: Engineering in Green Machinery, vol. 1, no. 1, 2024,

doi:10.30587/enigma.v1i1.8836.

[3] H. Istiqlaliyah, “Analisa Perawatan Mesin Pengaduk Petis Menggunakan Metode

Preventive Maintenance,” Prosiding SEMNAS INOTEK, vol. 9, no. 1, 2025.

[4] A. Y. Mastiqar, V. Rizkia, dan I. Nuriskasari, “Analisa Kerusakan Bearing pada

Conveyor Mesin Shrink Tunnel,” 2023.

[5] M. Riva'i dan N. P., “Analisa Kerusakan Bantalan Bola Berdasarkan Signal Getaran,”

2018.

[6] K. Y. Utomo, W. Setyadi, dan P. Ananda, “Jurnal Ilmiah Giga,” vol. 22, no. 2, 2019.

[7] B. Waskito, H. Abdillah, dan A. Dwiyanto, “Analisis Perawatan Mesin Belt Conveyor

di PT X,” Journal of Social Science Research, vol. 5, no. 1, 2025.

[8] A. Ducha dan B. Kurniawan, “Pendekatan Preventive Maintenance Mesin Conveyor PT

XYZ Guna Menjaga Kinerja Conveyor,” Jurnal Teknik Industri dan Teknologi, 2025.

[9] S. Kristian, A. Mulyono, dan R. Santosa, “Preventive Maintenance Scheduling on Belt

Conveyor Using Failure Mode Effect and Criticality Analysis,” Jurnal Sains dan

Teknologi Industri, 2021.

[10] S. Khasanah dan B. Panuntun, “Analysis of Work Efficiency on Maintenance of

Critical Belt Conveyor Machine Components Using Preventive Maintenance

Approach,” G-Tech: Jurnal Tekno Rekayasa, 2023.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 2 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

ANALISIS PERAWATAN BEARING UNIT CONVEYOR BREADED COOK MENGGUNAKAN METODE PREVENTIVE MAINTENANCE. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(2), 1480-1486. https://doi.org/10.29407/7df39h91