Aplikasi Metode HIRARC Untuk Pengendalian Risiko Bahaya K3 Pada Proses Sub Assembly Pabrikasi Bagian PPC Material Di PT. INKA (PERSERO) Pabrik Banyuwangi

Authors

  • Aloysius Tommy Hendrawan Universitas PGRI Madiun Indonesia
  • Raesyari Nazwa Almadina Universitas PGRI Madiun Indonesia

DOI:

https://doi.org/10.29407/ar3x4k84

Abstract

Penelitian ini bertujuan menganalisis penerapan Keselamatan dan Kesehatan Kerja (K3) pada proses sub assembly fabrikasi di Bagian Perencanaan Produksi dan Pengendalian Material (PPC) PT INKA (Persero) Pabrik Banyuwangi. Metode yang digunakan adalah HIRARC (Hazard Identification, Risk Assessment, and Risk Control) dengan pendekatan observasi, wawancara, dan studi dokumentasi. Hasil penelitian menunjukkan bahwa potensi bahaya utama berasal dari aktivitas lifting material, pengelasan, grinding, dan pekerjaan pada ketinggian. Implementasi pengendalian melalui penggunaan APD, inspeksi peralatan, safety briefing, serta pengawasan rutin mampu menurunkan tingkat risiko dari kategori tinggi hingga ekstrem menjadi rendah hingga sedang. Penerapan K3 yang konsisten berkontribusi terhadap peningkatan keselamatan kerja dan produktivitas perusahaan.

Keywords:

HIRARC, K3, PPC, Risiko Kerja, Sub Assembly Fabrikasi

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] D. Masri, “Hazard Identification, Risk Assessment and Determining Control Occupational

Health and Safety (OHS) in CV C-Maxi Alloycast,” Journal of Engineering and

Technological Sciences, vol. 54, no. 2, 2022, DOI: 10.5614/j.eng.technol.sci.2022.54.2.1.

[2] M. F. Pratama, A. Suryadi, dan A. Nugroho, “Analisis Risiko Keselamatan dan Kesehatan

Kerja Menggunakan Metode Hazard Identification Risk Assessment and Risk Control

(HIRARC),” Jurnal Industri dan Teknologi, vol. 25, no. 2, pp. 115–124, 2022, DOI:

10.47313/jig.v25i2.1922.

[3] B. R. Irwanda, A. Purnomo, dan N. Hidayati, “Analisis Risiko Keselamatan dan Kesehatan

Kerja dengan Metode HIRARC pada Proses Produksi Industri,” Gema Lingkungan

Kesehatan, vol. 20, no. 1, pp. 1–10, 2022, DOI: 10.36568/gelinkes.v20i1.10.

[4] P. Amanda, “Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC pada

Industri Manufaktur,” Jurnal Riset Teknik Industri Prima, vol. 4, no. 1, pp. 1–9, 2022, DOI:

10.34012/juriti.v4i1.1618.

[5] A. S. Mahendra dan I. Iftadi, “Designing Risk Control Strategies Using HIRARC-Based

Risk Management to Comply Occupational Health and Safety Management System

Standards in Manufacturing Activities,” Teknoin, vol. 30, no. 1, pp. 13–24, 2024, DOI:

10.20885/teknoin.vol30.iss1.art2.

[6] M. Rodríguez-Martín, J. M. García, and P. Sánchez, “Asking About Risk in a Company:

A New Approach to Learning ISO 45001,” Standards, vol. 3, no. 1, pp. 25–37, 2023, DOI:

10.3390/standards3010003.

[7] C. Bejinariu, D. Darabont, and A. Baciu, “Considerations Regarding the Application of

Occupational Injury and Illness Risk Assessment Method in Relation to ISO 45001,”

Sustainability, vol. 15, no. 3, 2023, DOI: 10.3390/su15032121.

[8] I. Joo and K. Baek, “The Consequences of ISO 45001: Preliminary Analysis of Cases in

Korea,” Journal of Occupational Health, vol. 66, no. 1, 2024, DOI:

10.1093/joccuh/uiad007.

[9] M. P. Battaglia, F. Ricci, and L. Ferraris, “Implementation of Occupational Health and

Safety Management Systems Based on ISO 45001 in Manufacturing Industries,” Safety

Science, vol. 170, 2024, DOI: 10.1016/j.ssci.2023.106321.

[10] S. Rahman, A. Karim, and M. Hasan, “Effectiveness of Personal Protective Equipment

and Risk Control Measures in Manufacturing Industry,” International Journal of

Occupational Safety and Ergonomics, vol. 30, no. 2, pp. 455–466, 2024, DOI:

10.1080/10803548.2024.2301456.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 2 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

Aplikasi Metode HIRARC Untuk Pengendalian Risiko Bahaya K3 Pada Proses Sub Assembly Pabrikasi Bagian PPC Material Di PT. INKA (PERSERO) Pabrik Banyuwangi. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(2), 1266-1274. https://doi.org/10.29407/ar3x4k84