Perancangan Wajan Pada Mesin Pengaduk Petis Kapasitas 15 kg / Jam
DOI:
https://doi.org/10.29407/zxepb748Abstract
Salah satu bagian mesin pengaduk petis adalah kontainer atau dalam hal ini disebut sebagai wajan. Dalam pembuatan wajan, tentunya membutuhkan pemilihan bahan yang tepat agar tidak mengganggu kualitas dari makanan yang dihasilkan. Dari hasil perancangan wajan pada mesin pengaduk petis ini menggunakan material yang berstatus food grade sehingga sesuai dengan standar pengolahan makanan. Material yang dipilih adalah stainless steel 304 yang tahan terhadap karat dan lebih tahan lama dari pada bahan bahan yang lainnya. Material ini juga mempunyai sifat yang anti lengket, sehingga aman untuk pengolahan petis yang memiliki karakter kental. Metode yang digunakan dalam penelitian ini adalah perancangan, yang diawali dengan pembuatan desain serta perhitungan dimensi agar dapat memenuhi kapasitas yang telah ditetapkan. Agar mampu menampung adonan sebanyak 15 kg, maka wajan ini dirancang dengan diameter 600mm, ketinggian tembereng sebesar 160 mm, dan ketinggian tabung sebesar 100 mm. Desain wajan ini dibuat dengan model setengah bola yang ditambah model tabung diatasnya agar selama proses adonan tidak tumpah ke luar.
One part of the petis mixer machine is the container or in this case called a pan. In making a pan, of course, it requires the selection of the right material so as not to interfere with the quality of the food produced. From the design results of the pan on this petis mixer machine, it uses food grade material so that it is in accordance with food processing standards. The material chosen is 304 stainless steel which is rust-resistant and more durable than other materials. This material also has non-stick properties, so it is safe for processing petis which has a thick character. The method used in this study is design, which begins with making a design and calculating dimensions in order to meet the specified capacity. In order to be able to accommodate 15 kg of dough, this pan is designed with a diameter of 600 mm, a section height of 160 mm, and a tube height of 100 mm. The design of this pan is made with a half-ball model with a tube model added on top so that during the process the dough does not spill out.
Keywords:
Perancangan, Wajan Pengaduk Petis, Stainless Steel##plugins.themes.default.displayStats.downloads##
References
[1] S. Al Farisi, M. Iqbal Fasa, and Suharto, “Peran Umkm (Usaha Mikro Kecil Menengah) Dalam Meningkatkan Kesejahteraan Masyarakat,” J. Din. Ekon. Syariah, vol. 9, no. 1, pp. 73–84, 2022, doi: 10.53429/jdes.v9ino.1.307.
[2] P. P. Mulawato and P. Handoyo, “Dampak Modernitas Terhadap Identitas Sosial Makanan Tradisional Surabaya ‘ Rujak Cingur ,’” vol. 06, no. 3, pp. 218–226, 2024, doi: https://doi.org/10.20527/padaringan.v2i1.
[3] A. S. Istiqhfariyah and H. W. Utami, “Analisis Ketahanan Usaha Pengolahan Petis Ikan Sebelum dan Selama Masa Pandemi Covid-19 di Desa Prenduan Kecamatan Pragaan Kabupaten Sumenep,” OECONOMICUS J. Econ., vol. 6, no. 1, pp. 49–57, 2021, doi: 10.15642/oje.2021.6.1.49-57.
[4] Zubairi A, Firdausiyah N, and Candra D M, “ANALISIS STRATEGI PROMOSI SYARIAH DALAM PENINGKATAN VOLUME PENJUALAN PETIS ARBA’ UD. KURNIA INDUSTRI MUNCAR BANYUWANGI,” Al-Idarah J. Manaj. dan Bisnis Islam, vol. 3, no. 1, pp. 45–54, 2022, doi: https://doi.org/10.35316/idarah.2022.v3i1.99-116.
[5] Nurul Imamah, “Pengembangan Umkm Petis Sebagai Potensi Daerah (Studi Kasus Di Desa Kramat Kabupaten Pamekasan) Artikel,” Academia.Edu, pp. 1–23, 2020, doi: https://doi.org/10.14710/jtp.2021.27439.
[6] S. Huda, Siti Naviah, and Natasya habibah, “Pkm-Mekanisasi Produksi Petis Udang Di Ud.Murni Sidoarjo,” J. Penamas Adi Buana, vol. 4, no. 1, pp. 33–36, 2020, doi: 10.36456/penamas.vol4.no1.a2428.
[7] B. A. Prastyo and H. Mahmudi, “Perancangan Sistem Penggorengan Pada Mesin Pembuat Keripik Serbaguna Dengan Metode Deep Frying,” Semin. Nas. Inov. Teknol. UN PGRI Kediri, vol. 4, no. 1, pp. 1–6, 2020, doi: https://doi.org/10.29407/inotek.v4i3.101.
[8] F. A. P. Putra, Y. S. Pramesti, and M. M. Ilham, “Rancang Bangun Pemanas pada Mesin Produksi Jahe Kristal Semi Otomatis Kapasitas 5 Kg,” Semin. Nas. Inov. Teknol., pp. 113–119, 2022, doi: https://doi.org/10.29407/inotek.v6i2.2604.
[9] L. A. Ramadani and M. M. Ilham, “Rancang Bangun Komponen Pengaduk Adonan Permen Tape Kapasitas 20kg,” vol. 8, pp. 1204–1211, 2024, doi: https://doi.org/10.29407/inotek.v8i2.5056.
[10] B. Haerani, Jamaluddin, and Suardy, “Modifikasi Mesin Pengaduk Dodol Skala Industri Rumah Tangga,” J. Pendidik. Teknol. Pertan., vol. 5, no. 2, pp. 150–157, 2019, doi: https://doi.org/10.26858/jptp.v5i0.9076.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Resha Allegra Putra Pidegsa, Haris Mahmudi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
