Perancangan Sistem Transmisi Pada Mesin-Mesin Pembuat Tempe Kapasitas 30 kg
DOI:
https://doi.org/10.29407/jn78kw09Abstract
Pembuatan tempe di Kabupaten Jombang masih menggunakan cara manual sehingga perlu dirancang mesin-mesin pembuat tempe yaitu mesin pengupas kulit ari kedelai, mesin pengering kedelai, dan mesin peragian kedelai. Sistem transmisi mesin pengupas kulit ari kedelai dirancang menggunakan puli motor diameter 63 mm, puli penggerak 150 mm, sabuk-V tipe A41, dan poros berdiameter 25 mm panjang 500 mm. Sistem transmisi mesin pengering kedelai menggunakan puli motor berdiameter 79.2 mm, puli penggerak 198 mm, sabuk-V tipe A32, dan poros berdiameter 20 mm panjang 613.4 mm. Sedangkan mesin peragian menggunakan puli motor berdiameter 80 mm, puli penggerak 240 mm, sabuk-V tipe A30 dan A40, poros berdiameter 30 mm panjang 700 mm, serta gearbox rasio 1:50. Dari hasil uji coba didapatkan waktu proses 30 kg/14 menit mulai dari pengupasan, pengeringan, dan peragian. Hasil pemrosesan dinilai memenuhi persyaratan pembuatan tempe dengan lebih efektif dan efisien dibandingkan cara-cara manual.
Keywords:
tempe, kedelai, sistem transmisi, pengupas, pengering, peragian##plugins.themes.default.displayStats.downloads##
References
M. Arsana, N. Sukma Drastiawati, and E. Ningsih, “Designing and Fabrication of Integrated Soybean Machine (3 in 1 Process) to Optimize Tempe Producers Productivity,” 2021.
P. I. Gultom and P. Tamara, “PERANCANGAN MESIN PENGUPAS KEDELAI DENGAN METODE WET PROCESS SKALA HOME INDUSTRY,” 2021.
Y. S. Pramesti, I. Setyowidodo, and F. Rhohman, “Analisis Gaya Dan Daya Pada Alat Pengaduk Mesin Kristalisasi Jahe Dengan Kapasitas 5 Kg / Jam,” vol. 6, no. 1, pp. 98–106, 2023.
A. N. Prastyo and A. Jabir, “RANCANG BANGUN SISTEM TRANSMISI PADA MESIN PENGUPAS KULIT ARI KEDELAI.”
M. Z. Rozikin and M. Umar, “RANCANG BANGUN MESIN PENGUPAS KULIT ARI KEDELAI DENGAN KAPASITAS 180KG/JAM UNTUK INDUSTRI TEMPE,” Mechonversio Mec. Eng. J., vol. 1, no. 1, pp. 23–27, 2018.
W. K. Sugandi, A. M. Kramadibrata, F. Fetriyuna, and Y. Prabowo, “Analisis Teknik dan Uji Kinerja Mesin Peniris Minyak (Spinner) (Technical Analysis and Test Performance of Oil Spinner Machine),” J. Ilm. Rekayasa Pertan. dan Biosist., vol. 6, no. 1, pp. 17–26, Mar. 2018, doi: 10.29303/jrpb.v6i1.65.
A. S. Pribadi, “PLANNING BUILD FOR DONUT DOUGH MIXING MACHINE.”
S. Abdul Muttalib, W. Apriyanditra, I. Yulianti, R. Hasmi, and M. Umas Hartono, “RANCANG BANGUN MESIN PENCAMPUR KEDELAI DENGAN KAPANG (RAGI TEMPE) PADA INDUSTRI RUMAHAN DI DAERAH KOTA MATARAM,” 2017.
M. M. Ilham, F. Suzantho, and F. Achmadi, “Meningkatkan kinerja usaha kecil menengah dengan pendekatan value engineering,” vol. 1, no. 1, pp. 35–41, 2018.
M. Mulyadi, “Penelitian Kuantitatif Dan Kualitatif Serta Pemikiran Dasar Menggabungkannya [Quantitative and Qualitative Research and Basic Rationale to Combine Them],” J. Stud. Komun. dan Media, vol. 15, no. 1, pp. 128–138, 2019.
“Shigley’s Mecha nical Engineering Design.”
H. Istiqlaliyah, “Perencanaan Mesin Peniris Minyak Pada Keripik Nangka Dengan Kapasitas 2,5 Kg / Menit,” Nusant. Eng., vol. 2, no. 1, pp. 37–43, 2013.
A. A. Nugroho and F. Rhohman, “Analisa Kebutuhan Daya Pada Mesin Pemarut Kelapa Kapasitas 20 Kg/Jam,” Semnasinotek 6, pp. 226–231, 2022, [Online]. Available: https://proceeding.unpkediri.ac.id/index.php/inotek/article/view/2489/1552
A. S. Alfauzi et al., “RANCANG BANGUN MESIN PENIRIS MINYAK (Spinner) DENGAN PENGGERAK MOTOR LISTRIK ½ HP.”
A. Setiawan and D. Mashudi, “Rancang Bangun Mesin Peragi Tape Dan Pengaruhnya Terhadap Tingkat Produktivitas Peragian Tape Di Sumberasri Design and Build of a Tape Fermentation Machine and Its Effect on Productivity Levels of Tape Fermentation in Sumberasri,” 2021.
K. Nadliroh and F. Rohman, “The Design of Washer and Dryer Machine for Chopped Plastic Bottle,” vol. 1, no. 1, 2021.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Monicha Sari, Kuni Nadliroh
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
