Investigasi Terhadap Hasil Proses Pyrolisis Sampah Plastik Jenis Pet Dengan Katalis Alam Dari Klaten Jawa Tengah Indonesia

Authors

  • Nuryosuwito Nuryosuwito Teknik Mesin, Fakultas Teknik, Universitas Nusantara PGRI Kediri Indonesia
  • Sudjito S. Teknik Mesin, Fakultas Teknik, Universitas Brawijaya Indonesia
  • Widya Wijayanti Teknik Mesin, Fakultas Teknik, Universitas Brawijaya Indonesia
  • Nurcholis Hamidi Teknik Mesin, Fakultas Teknik, Universitas Brawijaya Indonesia
  • Am. Mufarrih Teknik Mesin, Fakultas Teknik, Universitas Nusantara PGRI Kediri Indonesia

DOI:

https://doi.org/10.29407/inotek.v2i1.466

Abstract

Produksi plastik global meningkat selama bertahun-tahun karena banyaknya aplikasi plastik di banyak sektor. Permintaan terus menerus dari plastik menyebabkan akumulasi limbah plastik di TPA menghabiskan banyak ruang yang berkontribusi terhadap masalah lingkungan. Meningkatnya permintaan plastik menyebabkan pelepasan minyak bumi sebagai bagian dari bahan bakar fosil yang tidak terbarukan karena plastik adalah bahan berbasis minyak bumi. oleh karena itu dalam penelitian ini akan dilakukan studi terhadap karakteristik pirolisis, material Sampah plastik PET dengan katalis alam Klaten, Jawa Tengah, Indonesia. Dari hasil proses pirolisis menunjukkan bahwa jenis bahan baku sangat mempengaruhi hasil produk dan kualitas produk cair dan padat Sampah plastik PET menghasilkan fraksi cairan tertinggi. Paduan katalis mengurangi fraksi cairan dan meningkatkan fraksi gas. Selanjutnya, sampah plastik kotamadya menghasilkan produk dengan nilai lebih tinggi dari pada produk biomassa sampah plastik bisa digunakan sebagai bahan bakar alternatif.

Keywords:

Pirolisis, Sampah Plastic, PET dengan Katalis Alam

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

Association of Plastic Manufacturers Europe. An analysis of European plastics production, demand and waste data. Belgium: European Association of Plastics Recycling and Recovery organisations; 2015. p. 1–32.

U.S. Environmental Protection Agency. Common wastes and materials. US; 2014.

Mochamad Syamsiroa,d*, Harwin Saptoadib, Tinton Norsujiantob, Putri Noviasria,b,Shuo Chenga, Zainal Alimuddinc, Kunio Yoshikawad (2013) Fuel oil Productionfrom Municipal Plastic Wastes in Sequential Pirolisis and Catalytic Reforming Reactors Department of Environmental Science and Technology, Tokyo Institute of Technology, G5-8, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan.

Al-Salem, S.M., Lettieri P. danBaeyens J., 2009. Recycling And Recovery Routesofplastic Solid Waste (PSW). Waste Management, 29, 2625-2643.

Fakhrhoseini SM, Dastanian M. Predicting pirolisis products of PE, PP and PET using NRTL activity coefficient model. Hindawi Publishing Corporation;2013. p. 1–5.

J. Scheirs, W. Kaminsky, “Feedstock recycling and pirolisis of waste plastics: converting waste plastics into diesel and other fuels”, J. Wiley & Sons, 2006.

J. Yang, R. Miranda, and C. Roy. “Using the DTG curve fitting method to determine the apparent kinetic parameters of thermal decomposition of polymers”.Polymer Degradation and Stability, vol 73, pp. 455-461, 2001.

Das, S. dan Pande, S., 2007, Pirolisis and Catalytic Cracking of Municipal Plastic Waste forRecovery of Gasoline Range Hydrocarbons, Thesis, Chemical Engineering Department National Institute of Technology Rourkela.

Al-Salem, S.M., Lettieri, P., Kinetics of Polyethylene Terephthalate (PET) and Polystyrene (PS) Dynamic Pirolisis, World Academy of Science, Engineering and Technology, 66 2010, pp. 1267-127

Suyartono & Husaini. 1991. Tinjauan Terhadap Kegiatan Lit-Bang Pemanfaatan Zeolit Indonesia Yang Dilakukan oleh PPTM periode 1980 – 1990. Buletin PPTM. Vol. 13(4):1–13.

Downloads

Published

2020-12-18

Issue

Vol. 2 No. 1 (2018): PROSIDING SEMNAS INOTEK Ke-II Tahun 2018

Section

Articles

License

Copyright (c) 2020 Nuryosuwito Nuryosuwito, Sudjito S., Widya Wijayanti, Nurcholis Hamidi, Am. Mufarrih

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

Investigasi Terhadap Hasil Proses Pyrolisis Sampah Plastik Jenis Pet Dengan Katalis Alam Dari Klaten Jawa Tengah Indonesia. (2020). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 2(1), 113-118. https://doi.org/10.29407/inotek.v2i1.466