Rancang Bangun Nozzle Sprayer Pada Mesin Rotary Drum Filter 3M
DOI:
https://doi.org/10.29407/inotek.v7i1.3468Abstract
Nozzle sprayer adalah alat yang dirancang sebagai penyemprotan pada mesin rotary drum filter untuk proses pembilasan kotoran yang berada pada filter. Adappun langkah-langkah yang digunkan dalam proses perancangan nozzle sprayer yaitu observasi, studi literatur,perumusan masalah, desain, perakitan alat,pengujian alat dan pembuatan laporan. Hasil dari rancang bangun mesin rotary drum filter ini menggunakan booster pump 12V, jumlah nozzle sprayer 8 biji dengan bentuk semprotan pipih,dan berdasarkan hasil perhitungan didapatkan lebar penyemprotan keseluruhan 680 mm.
Keywords:
Nozzle, Penyemprotan, filter, Sprayer##plugins.themes.default.displayStats.downloads##
References
J. I. Biologi, “Bioscientist : Jurnal Ilmiah Biologi PREVALENSI EKTOPARASIT PADA BENIH IKAN KOI Cyprinus KABUPATEN BLITAR Program Studi Pendidikan Biologi , FKIP , Universitas Muhammadiyah Malang , Indonesia Bioscientist
S. Aldy Pratama and A. Suprihadi, “Pembuatan Rangka Mesin Pelet Ikan 3 in 1,” J. Mech. Eng., vol. x, no. x, pp. 1–4, 2021.
F. Rohmatulloh Ramadhan and A. Sulhan Fauzi, “Rancang Bangun Rangka Mesin Pencetak Pelet Kapasitas 40 Kg/ Jam,” J. Mesin Nusant., vol. 5, no. 1, pp. 2775–7390, 2022.
K. L. Yana, K. R. Dantes, and N. A. Wigraha, “Rancang Bangun Mesin Pompa Air Dengan Sistem Recharging,” J. Pendidik. Tek. Mesin Undiksha, vol. 5, no. 2, 2017, doi: 10.23887/jjtm.v5i2.10872.
Suparyanto dan Rosad (2015, “済無No Title No Title No Title,” Suparyanto dan Rosad (2015, vol. 5, no. 3, pp. 248–253, 2020.
W. Kurniawan, A. Saidah, P. Studi, and T. Mesin, “JURNAL KAJIAN TEKNIK MESIN Vol .. No … Hal,” pp. 1–11, 2022.
Nely Toding Bunga, Hendri Sukma, Hasan Hariri, Richard, and Y. A. Sihombing, “Rancang Bangun Mesin Gerinda Copy Camshaft,” J. ASIIMETRIK J. Ilm. Rekayasa Inov., vol. 1, no. 1, pp. 17–25, 2019, doi: 10.35814/asiimetrik.v1i1.214.
A. Saleh et al., “Rancang bangun rangka mesin pencacah limbah kelapa,” vol. 16, no. 2, pp. 1–4, 2022.
P. Yosua, D. B. Santoso, and A. Stefanie, “Rancang Bangun Automatic Washing and Drying System untuk Mesin Pencuci Cylinder Block Motor,” J. Ilm. Wahana Pendidik., vol. 6, no. 3, pp. 295–307, 2020, doi: 10.5281/zenodo.5167080.
M. F. Dzikriansyah, “Analisa pengaruh jarak nozzle dan tekanan udara pada pelapisan dengan metode air spray terhadap sifat magnetik komposit barium heksaferrit polianilin,”
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Endra Setiawan, M Muslimin Ilham, Yasinta Sindy Pramesti
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
