Analisis Pengaruh Jenis Material Terhadap Kekuatan Rangka Mesin CNC Router Cutting 3 Axis
DOI:
https://doi.org/10.29407/avpe7n88Abstract
Rangka mesin CNC Router Cutting 3 Axis merupakan komponen struktural utama yang menentukan kestabilan dan akurasi mesin selama proses pemesinan. Penelitian ini bertujuan merancang rangka mesin CNC Router Cutting 3 Axis menggunakan SolidWorks serta menganalisis kekuatan rangka dengan variasi material Hollow ASTM A500 Grade C dan Angle Iron ASTM A36 melalui Finite Element Analysis (FEA). Beban yang diterapkan sebesar 60 kg (600 N). Parameter yang dianalisis meliputi Von Mises stress, displacement, dan safety factor. Hasil simulasi menunjukkan Hollow ASTM A500 Grade C menghasilkan tegangan maksimum 1,073 x 10^8 N/m^2, displacement 2,667 x 10^-4 mm, dan safety factor +-2,3. Sementara Angle Iron ASTM A36 menghasilkan tegangan maksimum 3,958 x 10^6 N/m^2 dengan displacement 4,492 x 10^-1 mm. Material Hollow ASTM A500 Grade C terbukti lebih optimal karena memiliki kekakuan lebih tinggi, deformasi lebih kecil, dan margin keamanan lebih baik sebagai rangka utama mesin CNC Router Cutting 3 Axis..
Keywords:
Angle Iron ASTM A36, CNC Router, Finite Element Analysis, Hollow ASTM A500 Grade C, SolidWorks##plugins.themes.default.displayStats.downloads##
References
[1] I. Ulya, K. Pramesti, dan N. Aprianto, "Analisis Persaingan dan Pengembangan Strategi Industri
Manufaktur untuk Meningkatkan Daya Saing," Musytari: Jurnal Manajemen, Akuntansi, dan
Ekonomi, vol. 11, no. 5, hal. 101-110, 2024, doi: 10.29407/musytari.v11i5.21594.
[2] I. Anaam, T. Hidayat, R. Pranata, H. Abdillah, dan A. Wibisono Putra, "Pengaruh Trend Otomasi
dalam Dunia Manufaktur dan Industri," Vocational Education National Seminar (VENS), vol. 1, no.
1, hal. 46-50, 2022, doi: 10.29407/vens.v1i1.1024.
[3] W. Bangse dan B. Adesanya, "Design and Fabrication of a CNC Router Machine for Wood
Engraving," Journal of Physics: Conference Series, vol. 1450, hal. 012094, 2020, doi: 10.1088/1742-
6596/1450/1/012094.
[4] A. Salam, M. Karim, dan K. Azam, "Design and Development of a CNC Router Machine,"
International Journal of Mechanical Engineering, vol. 7, no. 3, hal. 35-43, 2019, doi:
10.14445/23488360/IJME-V7I3P105.
[5] M. Firgiawan dan Y. Nurcahyanie, "Optimizing 3-Axis CNC Router Design: Using QFD and DFM
for Enhanced Precision and Efficiency," Jurnal bit-Tech, vol. 8, no. 1, hal. 118-126, 2025, doi:
10.36456/bit-tech.vol8.no1.a9147.
[6] E. S. Yulianto dan I. Pranata, "Karakteristik dan Aplikasi Besi Hollow pada Konstruksi Rangka
Mesin dan Perkakas," Jurnal Mesin Nusantara (JMN), vol. 5, no. 2, hal. 60-67, 2022, doi:
10.29407/jmn.v5i2.18119.
[7] M. N. Mukhtar dan D. Akrianto, "Desain Rancangan Gantry CNC Router 3 Axis dengan Pendekatan
Topology," ELEMEN: Jurnal Teknik Mesin, vol. 9, no. 2, hal. 131-139, 2022, doi:
10.34128/je.v9i2.182.
[8] P. Elmiawan dan M. Fazalul, "Akurasi Mesin CNC Router Low Budget Berbasis Mach3," ROTOR,
vol. 15, no. 2, hal. 70-75, 2022, doi: 10.19184/rotor.v15i2.30875.
[9] A. R. Louis dan G. Mulyono, "Analisis Elemen Hingga (FEA) sebagai Metode Evaluasi Perilaku
Struktur pada Perancangan Mekanik," Jurnal Teknik Mesin, vol. 7, no. 1, hal. 15-22, 2019, doi:
10.29407/jmn.v2i1.13063.
[10] D. Arliansyah, "Penerapan Metode Elemen Hingga (FEM) dalam Analisis Struktur Teknik," Jurnal
Rekayasa dan Teknologi, vol. 5, no. 1, hal. 40-48, 2023, doi: 10.30998/jrkt.v5i1.8671.
[11] H. Pilargenta, F. Rhohman, dan A. Sugianto, "Analisis Pemilihan Material dan Perhitungan Dimensi
Rangka Mesin terhadap Distribusi Tegangan dan Kegagalan Struktural," Nusantara of Engineering
(NOE), vol. 7, no. 2, hal. 33-41, 2024, doi: 10.29407/noe.v7i02.21384.
[12] R. Sofyan, A. Putra, dan T. Hidayat, "Penerapan FEA Menggunakan SolidWorks untuk Evaluasi
Tegangan dan Deformasi pada Struktur Mesin," Jurnal Teknologi Rekayasa, vol. 4, no. 1, hal. 50-
58, 2019, doi: 10.29407/jmn.v2i2.13591.
[13] M. A. Trilaksono, A. Akbar, dan H. Mahmudi, "Rancang Bangun Mesin Pengayak Padi Semi
Otomatis Kapasitas 200 Kg/Jam Menggunakan Motor Listrik," Prosiding SEMNAS INOTEK, vol.
6, no. 2, hal. 328-332, 2022, doi: 10.29407/inotek.v6i2.2606.
[14] H. Mahmudi dan R. Wijaya, "Analisis Perhitungan Daya pada Mesin Pemarut dan Pemeras Kelapa
Sistem Hidraulik dengan Kapasitas 10 Kilogram," Prosiding SEMNAS INOTEK, vol. 5, no. 2, hal.
019-024, 2021, doi: 10.29407/inotek.v5i2.1007.
[15] [15] Sugiyono, Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta, 2019.
[16] [16] L. A. N. Wibawa, "Analisis Kekuatan Material dan Distribusi Tegangan dalam Desain
Komponen Mesin," Jurnal Teknik Mesin dan Material, vol. 6, no. 2, hal. 45-53, 2018, doi:
10.29407/jmn.v1i2.13626.
[17] Stiawan, "Karakteristik dan Aplikasi Baja Struktural ASTM A36 pada Rangka Mesin," Jurnal
Teknik Material dan Manufaktur, vol. 8, no. 1, hal. 55-62, 2022, doi: 10.29407/jmn.v5i1.17948.
[18] H. Istiqlaliyah, A. S. Fauzi, K. Nadliroh, dan H. Mahmudi, "Analisa Pengaruh Proses Alkali pada
Komposit Serat Tebu Bermatrik Polimer," Jurnal Mesin Nusantara (JMN), vol. 5, no. 2, hal. 189-
200, 2022, doi: 10.29407/jmn.v5i2.19413.
[19] M. A. Wicaksono, H. Istiqlaliyah, dan H. Mahmudi, "Rancang Bangun Tabung Mesin Pengaduk
Pakan Ayam Horen Kapasitas 50 Kg/2 Menit," Nusantara of Engineering (NOE), vol. 8, no. 1, hal.
85-92, 2025, doi: 10.29407/noe.v8i1.25049.
[20] H. Mahmudi, "Analisa Perhitungan Pulley dan V-Belt pada Sistem Transmisi Mesin Pencacah,"
Jurnal Mesin Nusantara (JMN), vol. 4, no. 1, hal. 40-46, 2021, doi: 10.29407/jmn.v4i1.16201.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
