Analisis Ergonomi Pencahayaan dan Suhu Kerja pada Bagian Sewing Industri Garmen

Authors

  • Aris Syaifuddin Universitas PGRI Madiun Indonesia
  • Aloysius Tommy Hendrawan Universitas PGRI Madiun Indonesia
  • Halwa Annisa Khoiri Universitas PGRI Madiun Indonesia

DOI:

https://doi.org/10.29407/psbes071

Abstract

Industri garmen memerlukan kondisi lingkungan kerja yang sesuai untuk mendukung ketelitian dan kenyamanan pekerja pada proses sewing. Penelitian ini bertujuan menganalisis tingkat pencahayaan dan suhu kerja pada bagian sewing di CV. Inti Karya Sejahtera Kabupaten Madiun serta mengevaluasi kesesuaiannya dengan standar ergonomi. Penelitian menggunakan metode kuantitatif deskriptif dengan objek penelitian sebanyak 60 stasiun kerja operator sewing. Data diperoleh melalui pengukuran langsung menggunakan lux meter dan thermo hygrometer. Hasil penelitian menunjukkan rata-rata pencahayaan sebesar 123,8 lux dan suhu kerja sebesar 37,5°C. Kedua parameter tersebut belum memenuhi standar ergonomi yang direkomendasikan untuk pekerjaan menjahit. Kondisi ini berpotensi menurunkan kenyamanan, kesehatan, dan produktivitas pekerja. Oleh karena itu, diperlukan perbaikan sistem pencahayaan dan ventilasi guna menciptakan lingkungan kerja yang lebih aman dan ergonomis.

Keywords:

Ergonomi Lingkungan, Pencahayaan, Produktivitas Kerja, Sewing, Suhu Kerja

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] E. W. Wijayati and A. Nurfitria, "Studi Ergonomi Terhadap Tingkat Pencahayaan, Suhu, dan Kelembapan Lingkungan Kerja di PR. Alaina," vol. 4, no. 2, pp. 49-55, 2025[cite: 18].

[2] G. Lee, S. Lee, S. Lee, and J. Jeong, "A Comparative Field Study of Indoor Environment Quality and Work Productivity between Job Types in a Research Institute in Korea," 2022[cite: 18].

[3] Z. D. Pratikto, E. Setyawat, and D. Thaib, "Analisis Hubungan Intensitas Pencahayaan Dan Kelelahan Mata Terhadap Produktivitas Kerja Pada Pekerja Konveksi Tahun 2022," vol. 7, no. 11, 2023[cite: 18].

[4] Y. Fang, C. Liu, C. Zhao, H. Zhang, and W. Wang, "A Study of the Effects of Different Indoor Lighting Environments on Computer Work Fatigue," 2022[cite: 18].

[5] S. Kawakubo, M. Sugiuchi, and S. Arata, "Office thermal environment that maximizes workers thermal comfort and productivity," Build. Environ., vol. 233, p. 110092, Feb. 2023, doi: 10.1016/j.buildenv.2023.110092[cite: 18].

[6] M. N. W. Hidayah, G. M. Munandar, Sawiji, and I. S. Maarif, "Analisis Ergonomi Lingkungan Kerja pada UMKM Sablon," vol. 4, no. 3, pp. 969-975, 2025[cite: 18].

[7] J. Lee, D. Kim, S. Lee, and J. Jeong, "Indoor Environmental Quality Survey in Research Institute: A Floor-by-Floor Analysis," pp. 1-17, 2021[cite: 18].

[8] G. A. Najjar and K. Akkad, "Classification of Lighting Design Aspects in Relation to Employees Productivity in Saudi Arabia," pp. 1-14, 2023[cite: 18].

[9] Y. Zhang et al., "The use of machine and deep learning to model the relationship between discomfort temperature and labor productivity loss among petrochemical workers," 2024[cite: 18].

[10] Kemenkes, Peraturan Menteri Kesehatan Republik Indonesia Nomor 70 Tahun 2016 tentang Standar dan Persyaratan Kesehatan Lingkungan Kerja Industri, 2016[cite: 18].

[11] R. Kr, E. Lumnitzer, L. Džu, and A. Yehorova, "Analysis of the Impact of Working Environment Factors on Employee's Health and Wellbeing; Workplace Lighting Design Evaluation and Improvement," 2021[cite: 18].

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 1 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

Analisis Ergonomi Pencahayaan dan Suhu Kerja pada Bagian Sewing Industri Garmen. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(1), 982-990. https://doi.org/10.29407/psbes071