Rancang Bangun Alat Powder Coating Skala UMKM

Authors

  • Febby Fatwatama Panjalu Universitas Nusantara PGRI Kediri Indonesia
  • Ali akbar Universitas Nusantara PGRI Kediri Indonesia
  • Yasinta sindy pramesti Universitas Nusantara PGRI Kediri Indonesia

DOI:

https://doi.org/10.29407/maqm0w90

Abstract

Abstrak— Perkembangan industri otomotif dan manufaktur logam menuntut proses pelapisan permukaan yang mampu memberikan perlindungan sekaligus meningkatkan nilai estetika produk. Namun, penerapan teknologi powder coating pada usaha mikro, kecil, dan menengah masih terbatas karena tingginya biaya investasi peralatan komersial. Penelitian ini bertujuan merancang dan membangun alat powder coating skala UMKM yang sederhana, ekonomis, dan mudah dioperasikan. Metode penelitian meliputi identifikasi kebutuhan, perancangan alat, pemilihan komponen, proses fabrikasi dan perakitan, serta pengujian kinerja alat pada proses pelapisan dan curing. Hasil penelitian menunjukkan bahwa alat yang dikembangkan mampu mendukung proses powder coating dengan baik dan menghasilkan lapisan yang merata pada permukaan logam dengan pengaturan suhu yang sesuai. Pengembangan alat ini memberikan alternatif teknologi pelapisan yang lebih terjangkau bagi UMKM serta mendukung peningkatan kualitas produk dan efisiensi proses produksi.

Keywords:

powder coating, pelapisan logam, UMKM

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] M. M. Ilham, F. Suzantho, and F. Achmadi, ―Meningkatkan kinerja usaha kecil

menengah dengan pendekatan value engineering,‖ vol. 1, no. 1, pp. 35–41, 2018.

[2] A. Sudarwanto and K. W. Darmojo, ―STRATEGI PENGEMBANGAN INDUSTRI

KRIYA LOGAM,‖ vol. 7, no. 1, pp. 62–69, 2018.

[3] E. Damayanti and E. Damayanti, ―PERANCANGAN SISTEM KENDALI PROSES

POWDER COATING BERBASIS ARDUINO UNO DAN SMARTPHONE

ANDROID,‖ vol. 10, no. 3, pp. 198–207, 2016.

[4] I. Stojanović, V. Šimunović, V. Alar, and F. Kapor, ―Experimental evaluation of

polyester and epoxy-polyester powder coatings in aggressive media,‖ Coatings, vol. 8,

no. 3, 2018, doi: 10.3390/coatings8030098.

[5] Bagustius Pratama Anf, ―Rancang Bangun Alat Sandblasting Dengan Blasting Room

Untuk Membersihkan Permukaan Logam Dari Kotoran,‖ 2025, Padang.

[6] N. M. Anindita, ―JURNAL INDUSTRI FURNITUR & PENGOLAHAN KAYU Vol

2 No 2 Desember 2024 PENGAPLIKASIAN METODE FINISHING POWDER

COATING PADA COFFEE TABLE METAL BERBAHAN STAINLESS STEEL

APPLICATION OF POWDER COATING FINISHING METHOD ON METAL,‖ vol.

2, no. 2, pp. 28–35, 2024.

[7] J. Cui, Y. Shao, H. Zhang, H. Zhang, and J. Zhu, ―Development of a novel silver ionsnanosilver complementary composite as antimicrobial additive for powder coating,‖

Chem. Eng. J., vol. 420, no. P2, p. 127633, 2021, doi: 10.1016/j.cej.2020.127633.

[8] P. Saint, P. Sorong, L. Rangka, P. Rangka, S. Kelapa, and M. Diesel, ―Desain rangka

utama mesin pengurai sabut kelapa asep surya sanjaya 1 yolanda j. lewerissa 2,‖ vol.

7, no. 1, pp. 1–8, 2022.

[9] S. D. Permata, N. Susanto, and W. Budiawan, ―Pengembangan Lemari Pakaian

Plywood Seno Art Gallery Dengan Pendekatan Rekayasa Nilai,‖ Ind. Eng. Online J.,

vol. 7, no. 4, pp. 1–6, 2019.

[10] Ari Supriadi, ―Pengembangan Mesin Penggerak Ayakan Serbuk Sisa Powder coating

dengan Metode Vibrasi,‖ vol. 2, no. 2, pp. 59–65, 2020.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 3 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

Rancang Bangun Alat Powder Coating Skala UMKM. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(3), 2807-2815. https://doi.org/10.29407/maqm0w90