Rancang Bangun Mesin Disc Mill FFC Berbasis Motor DC untuk Penggilingan Beras Menir Skala Kecil
DOI:
https://doi.org/10.29407/58bcz411Abstract
Pengolahan beras menir pada skala kecil masih menghadapi kendala keterbatasan alat yang efisien dan terjangkau. Penelitian ini bertujuan untuk merancang, membangun, dan menguji fungsional mesin Disc Mill FFC-15 berbasis motor DC untuk penggilingan beras menir skala kecil. Metode penelitian menggunakan pendekatan Research and Development (R&D) dengan tahapan identifikasi masalah, perancangan desain, fabrikasi, dan uji fungsional. Parameter yang diukur meliputi kapasitas produksi aktual, rendemen penggilingan, susut tercecer, dan waktu baku. Hasil uji coba menunjukkan kapasitas produksi rata-rata 4,59 kg/jam, rendemen rata-rata 86,17%, susut tercecer rata-rata 13,83%, dan waktu baku rata-rata 13,07 menit/kg. Mesin yang dirancang mampu memenuhi kebutuhan penggilingan beras menir pada skala UMKM dengan performa yang sebanding dengan penelitian terdahulu.
Keywords:
beras menir, disc mill, motor DC, penggilingan, UMKM##plugins.themes.default.displayStats.downloads##
References
[1] Johansen, ―Analisis Performa Mesin Penepung Tipe Disc Mill Ffc-15 Dalam
Memproduksi Tepung Jagung,‖ 2023.
[2] S. T. Kismanti and M. F. Nurdin, ―Rancang Bangun Mesin Penepung Tipe Disc Mill
FFC-15 pada Biji Jagung,‖ J. Bear. Borneo Mech. Eng. Sci., vol. 2, no. 2, pp. 69–76,
2023, doi: 10.35334/bearings.v2i2.4721.
[3] A. Sutejo, R. A. Putra, G. Ramdani, and D. Putri, ―Uji Performansi Mesin Penggiling
Tipe Disc Mill untuk Penepungan Porang,‖ 2025.
[4] Irwan, S. H. Djalil, A. R. Putri, and H. E. Prabowo, ―Potensi Menir sebagai Alternatif
Sumber Bahan Baku pada Pengembangan Produk Makanan Berbasis Tepung Beras :
Systematic Review 1,‖ J. Vocat. Innov. Achiev. Educ., vol. 1, no. 1, pp. 19–24, 2025.
[5] M. I. A. Lubis and A. Andasuryani, ―Uji Teknis Pengecilan Partikel Gula Tebu
menggunakan Disk Mill Tipe FFC-1,‖ J. Keteknikan Pertan., vol. 11, no. 2, pp. 138–152,
2023, doi: 10.19028/jtep.011.2.138-152.
[6] R. Siskandar, B. R. Kusumah, and L. C. Astuti, ―Performance Analysis of Disc Mill
Type FFC-15 Grinder for Making Charcoal Husk Flour Ridwan,‖ J. Tek. Pertan.
Lampung (Journal Agric. Eng., vol. 13, no. 4, p. 1121, 2024, doi: 10.23960/jtepl.v13i4.1121-1131.
[7] J. A. P. Yohanes Parulian Tambunan and D. K. S. J. F. Tamba, ―1,2,3,4),‖ vol. 2, no. 1,
pp. 175–181, 2021.
[8] G. Pramuhadi, A. Sutejo, and D. D. Wicaksono, ―Performance Evaluation of Ball Mill
Type Grinding Machine for Particle Size Reduction of Porang Glucomannan Crystals,‖ J.
Tek. Pertan. Lampung (Journal Agric. Eng., vol. 13, no. 1, p. 165, 2024, doi:
10.23960/jtep-l.v13i1.165-177.
[9] S. T. Kismanti and M. F. Nurdin, ―Ring Penahan Saringan Berfungsi menjaga saringan
agar tetap kuat dan tidak bergeser saat mesin digunakan.,‖ J. Bear. Borneo Mech. Eng.
Sci., vol. 2, no. 2, pp. 69–76, 2023, doi: 10.35334/bearings.v2i2.4721.
[10] H. Mahmudi, ―Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin
Pencacah,‖ J. Mesin Nusant., vol. 4, no. 1, pp. 40–46, 2021, doi:
10.29407/jmn.v4i1.16201.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
