Analisis Variasi Desain Dan Jenis Material Mata Bor Pada Mesin Cnc Router Cutting 3 Axis

Authors

  • Phino Salvino Universitas Nusantara PGRI kediri Indonesia
  • Hesti Istiqlaliyah Universitas Nusantara PGRI kediri Indonesia

DOI:

https://doi.org/10.29407/e4exj939

Abstract

Penelitian ini bertujuan menghasilkan pengaruh variasi desain geometri dan jenis material mata bor terhadap kualitas hasil pemotongan pada mesin CNC Router Cutting 3 Axis. Variasi yang diuji meliputi mata bor HSS dan cemented carbide dengan konfigurasi 2 flute dan 3 flute. Metode penelitian menggunakan pendekatan rekayasa eksperimental dengan pengujian langsung pada mesin CNC Router. Parameter evaluasi meluputi kehalusan permukaan, ketepatan dimensi, dan kondisi visual hasil pemotongan. Hasil penelitian diharapkan menunjukan kombinasi desain dan material mata bor yang mampu menghasilkan kualitas pemotongan yang lebih baik, jmur pakai yang lebih tinggi, serta proses pemesinan yang lebih stabil.

Keywords:

CNC Router, cemented carbide, geometri mata bor, HSS, kualitas pemotongan

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] F. R. Pamenang, F. Y. Utama, A. Nataria, and F. Ganda, ―Analisis Biaya Pemesinan

Dalam Proses Pengeboran Menggunakan Mata Bor HSS Dan Variasi Material Benda

Kerja,‖ vol. XX, no. Xx, 2024.

[2] M. W. Syifatillah, T. Machfuroh, A. Info, and S. Roughness, ―Optimization of CNC

Milling Parameters for Surface Roughness and Hardness of SS 316,‖ vol. 3, no. 1, pp.

44–54, 2026, doi: 10.26740/vubeta.v3i1.40971.

[3] W. Aribowo, L. Abualigah, D. Oliva, A. Aljohani, and A. Sabo, ―Chaotic red-tailed

hawk algorithm to optimize parameter power system stabilizer,‖ vol. 15, no. 4, pp.

3536–3545, 2025, doi: 10.11591/ijece.v15i4.pp3536-3545.

[4] Q. W. Liu, Y. M. Ying, J. X. Zhou, W. J. Zhang, Z. Liu, and B. B. Jia, ―Human

amniotic mesenchymal stem cells ‑ derived IGFBP ‑ 3 , DKK ‑ 3 , and DKK ‑ 1

attenuate liver fibrosis through inhibiting hepatic stellate cell activation by blocking

Wnt / β ‑ catenin signaling pathway in mice,‖ Stem Cell Res. Ther., pp. 1–18, 2022, doi:

10.1186/s13287-022-02906-z.

[5] M. Afnan, N. Hailmy, M. Oktaviadri, and A. R. Yusoff, ―INTERNATIONAL

JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING Materialadaptive kurtosis thresholding for real-time multi-parameter condition monitoring in

CNC milling,‖ vol. 23, no. 1, pp. 13237–13246, 2026.

[6] R. Napitupulu, S. Perangin, and H. V. Sihombing, ―Jurnal Dinamis ( Scientific Journal

of Mechanical Engineering ) The Effect of Machining Parameters of Water Surface

Tool Wear 6061be on 500 Watt Mini CNC Machining Using Straight Endmill Carbide

Tool With The Taguchi Method,‖ vol. 12, no. 2, pp. 64–71, 2024.

[7] A. Manuel, S. António, J. Festas, and J. Paulo, ―Multi-axis CNC milling of complex

surfaces in 7075 aluminium for aerospace applications,‖ pp. 3967–3978, 2026.

[8] A. Sifa, M. A. Ichwan, and T. Endramawan, ―PENGARUH ARUS DAN WAKTU

PADA MICRO RESISTANCE SPOT WELDING TERHADAP BAJA AISI 304 DAN

ALUMINIUM,‖ vol. 14, no. 1, pp. 115–125, 2023, doi: 10.21776/jrm.v14i1.1100.

[9] K. Aslantas, ―Experimental Study on the Effect of Cutting Tool Geometry in MicroMilling of Inconel 718,‖ 2020.

[10] B. Pakpahan et al., ―UAP BERBAHAN BAKAR CANGKANG DAN SERABUT

DENGAN KAPASITAS 20 TON UAP / JAM ANALYSIS OF COMPARATIVE

EFFECT ANALYSIS OF STEAM FUEL WITH A CAPACITY OF 20 TONS OF

STEAM / HOUR,‖ vol. 2, no. 2, pp. 1–10, 2021.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 3 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

Analisis Variasi Desain Dan Jenis Material Mata Bor Pada Mesin Cnc Router Cutting 3 Axis. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(3), 2323-2329. https://doi.org/10.29407/e4exj939