Rancang Bangun Oven Pengering Tipe Konveksi Menggunakan Bahan Bakar Gas LPG
DOI:
https://doi.org/10.29407/y9an4g23Abstract
Proses pengeringan kerupuk umumnya masih menggunakan sinar matahari sehingga sangat bergantung pada kondisi cuaca dan membutuhkan waktu yang relatif lama. Penelitian ini bertujuan untuk merancang oven pengering kerupuk tipe konveksi berbahan bakar gas LPG serta menganalisis kekuatan rangkanya menggunakan metode Finite Element Analysis (FEA). Metode penelitian yang digunakan adalah Research and Development (R&D) dengan pendekatan rancang bangun. Analisis dilakukan menggunakan Autodesk Inventor Professional 2020 dengan beban sebesar 71,5 kg. Hasil simulasi menunjukkan nilai tegangan Von Mises maksimum sebesar 36,28 MPa, displacement maksimum sebesar 0,08 mm, dan safety factor minimum sebesar 9,65. Nilai tersebut menunjukkan bahwa rangka mampu menahan beban kerja dengan aman tanpa mengalami deformasi yang signifikan. Dengan demikian, rancangan oven pengering kerupuk yang dihasilkan layak digunakan dan dapat mendukung proses pengeringan yang lebih efektif serta tidak bergantung pada kondisi cuaca
Keywords:
Drying Oven, Crackers, LPG, Finite Element Analysis (FEA), Frame strength##plugins.themes.default.displayStats.downloads##
References
[1] A. Aditya Rinaldi, R. Ulfa, and B. Setyawan, “Pembuatan Kerupuk Dengan Penambahan
Puree Ikan Tongkol,” Jurnal Teknologi Pangan dan Ilmu Pertanian (JIPANG), vol. 5, no.
2, pp. 19–25, 2023, doi: 10.36526/jipang.v5i2.
[2] M. F. Andreyanto, “Optimization of Shrimp Cracker Drying Parameters Using RSM and
RCA: Optimasi Parameter Pengeringan Kerupuk Udang Menggunakan RSM dan RCA,”
Indonesian Journal of Innovation Studies, vol. 26, no. 4, 2025, doi:
10.21070/ijins.v26i4.2105.
[3] M. Jefri, M. Anggara, and A. Hidayat, “Analisis Variasi Temperatur, Waktu Dan
Penempatan Kerupuk Ikan Tongkol Terhadap Performa Alat Pengering Tipe Rak Berbasis
Gas LPG,” Jurnal Gear : Energi, Perancangan, Manufaktur & Material, vol. 1, no. 2, pp.
57–68, 2023, doi: 10.36761/gear.v1i2.3179.
[4] D. Sanchia Samosir, Y. Bow, and A. Aswan, “Optimization of Drying Time and Thermal
Performance of Solar Dryer for Tekwan Products Based on Energy Balance Analysis,”
Techno: Jurnal Penelitian, vol. 14, no. 1, pp. 13–22, 2025, doi: 10.33387/tjp.v14i1.9790.
[5] A. Fatharani, F. Maissy, U. Anis, F. Yuwita, and Firmansyah, “Analisis Perubahan Warna
Gurita (Octopus sp.) Selama Pengeringan dengan Pengering Hibrid Bertenaga Surya,”
JURNAL TEKNOLOGI AGRO-INDUSTRI, vol. 11, no. 1, 2024, doi:
10.34128/jtai.v11i1.192.
[6] R. W. Adetia, A. Mukhtar, and A. Burhanuddin, “Analisis Persebaran Panas Pada Mesin
Oven Pengering Kerupuk Dengan Burner Sederhana Berbasis Computational Fluid
Dynamics,” Journal of Applied Mechanical Engineering and Renewable Energy
(JAMERE), vol. 4, no. 2, pp. 15–24, 2024, doi: 10.52158/jamere.v4i2.821.
[7] B. Siregar, M. Arfah, F. T. Ingtias, and N. Nurdiana, “Pengeringan Gambir Menggunakan
Oven Pengering Suhu Terkontrol dengan Pemanas Ganda,” IRA Jurnal Pengabdian
Kepada Masyarakat (IRAJPKM), vol. 2, no. 3, pp. 107–114, 2024, doi:
10.56862/irajpkm.v2i3.124.
[8] M. Waruwu, “Metode Penelitian dan Pengembangan (R&D): Konsep, Jenis, Tahapan dan
Kelebihan,” Jurnal Ilmiah Profesi Pendidikan, vol. 9, no. 2, pp. 1220–1230, 2024, doi:
10.29303/jipp.v9i2.2141.
[9] A. Wijayanto, A. Akbar, and K. Nadliroh, “Analisa Kekuatan Rangka Dynotest
Menggunakan Autodesk Inventor,” SEMNAS INOTEK, vol. 7, pp. 1301–1308, 2023, doi:
10.29407/inotek.v7i3.3571.
[10] A. Pratama and D. Agusman, “Desain dan Analisis Kekuatan Rangka Mesin Pres Batako
Menggunakan Finite Element Method,” Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa Dan
Inovasi, vol. 5, no. 2, pp. 221–230, 2023, doi: 10.35814/asiimetrik.v5i2.4658.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
