ANALISIS EFISIENSI TURBIN UAP SHINCO BERDAYA 4000 KW DI PABRIK GULA DJOMBANG BARU

Authors

  • Royhan Dewantara Universitas Nusantara PGRI kediri Indonesia
  • Ah. Sulhan Fauzi Universitas Nusantara PGRI kediri Indonesia

DOI:

https://doi.org/10.29407/ncxxcv08

Abstract

Penelitian ini bertujuan menganalisis kinerja dan efisiensi turbin uap Shinco berkapasitas 4000 kW pada sistem cogeneration di Pabrik Gula Djombang Baru. Metode penelitian menggunakan pendekatan deskriptif kuantitatif dengan analisis termodinamika berdasarkan siklus Rankine. Data yang digunakan berupa data operasional rata-rata periode September–November yang meliputi tekanan, temperatur, laju aliran massa uap, dan daya listrik aktual. Hasil penelitian menunjukkan bahwa turbin beroperasi dengan laju aliran massa uap rata-rata 18,0 kg/s dan menghasilkan daya turbin sebesar 7.907 kW serta daya listrik aktual sebesar 3.800 kW. Efisiensi isentropik rata-rata mencapai 80,0%, efisiensi termal sebesar 7,6%, dan heat rate sebesar 47.039 kJ/kWh. Nilai Energy Utilization Factor (EUF) sebesar 1,80 menunjukkan bahwa sistem cogeneration mampu memanfaatkan energi bahan bakar secara efektif melalui produksi energi listrik dan panas proses secara bersamaan. Hasil penelitian menunjukkan bahwa kinerja turbin masih berada dalam kondisi yang baik dan stabil selama periode pengamatan

Keywords:

Turbin Uap, Cogeneration, Efisiensi Isentropik, Heat Rate, Energy Utilization Factor

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] A. R. Prayuda and H. Kuncoro, “Analisis Eksergi pada Pembangkit Listrik Tenaga

Biomassa Pabrik,” vol. 14, no. 01, pp. 155–164, 2025. DOI:10.24127/trb.v14i1.4087

[2] M. Jeremiah, B. Kabeyi, and O. A. Olanrewaju, “Performance analysis and electricity

potential for Nzoia sugar factory,” Energy Reports, vol. 8, pp. 755–764, 2022, doi:

10.1016/j.egyr.2022.10.432. https://doi.org/10.1016/j.egyr.2022.10.432.

[3] Z. Effendi, I. U. P. Rangkuti, and E. K. Sitanggang, “Analisa Performansi Turbin Uap

Kapasitas 1 , 8 MW pada Pabrik Kelapa Sawit Kapasitas 50 Ton / Jam,” vol. 13, no. 02,

2024. https://repository.itsi.ac.id/handle/123456789/348

[4] R. Subagyo, “Sistem Pembangkit Dan Turbin Uap HMKB760 Dr.,”

2018.https://mesin.ulm.ac.id/assets/dist/bahan/Sistem_Pembangkit_dan_Turbin_Uap.pdf.

[5] Sugiyono, “metode penelitian kuantitatif, kualitatif dan R & D,” 2017.

https://www.researchgate.net/publication/377469385

[6] C. Buana, Y. Klistafani, S. Maarif, and A. M. Ilmunandar, “Analisis Kinerja Turbin Uap

Sebelum dan Sesudah Overhaul Pada Unit 1 PLTU Mamuju,” vol. 22, no. 1, pp. 77–89,

2024. https://doi.org/10.31963/sinergi.v22i1.4867.

[7] Y. S. T. Sinaga, “Analisis Variasi Suhu Dan Tekanan Pada Boiler Terhadap Penggunaan

Air Umpan : Pendeka Tan Metode Optimasi Taguchi Skripsi Oleh : Yesaya Sari Tua Sinaga

Fakultas Teknik Universitas Medan Area Medan Analisis Variasi Suhu Dan Tekanan Pada

Boiler Terhadap Pen,” 2025. https://repositori.uma.ac.id/handle/123456789/28969

[8] J. E. Siswanto, A. Hikayat, and Z. Anwar, “Analisa Pengaruh Temperatur Uap Superheated

Terhadap Peforma Boiler di PT. Perkebunan Nusantara VI PKS Aur Gading Batanghari

Jambi,” vol. 2, no. 1, pp. 64–69, 2023. https://doi.org/10.55331/jutmi.v2i1.6.

[9] A. Gunawan And A. Hiendro, “Pengaruh Perubahan Beban Terhadap Efisiensi Generator

Pada Unit 2 Pltu Bengkayang 2x50 Mw PT . Pln Indonesia Power UPK Singkawang,” vol.

9, no. 4, pp. 26–39, 2025. DOI:10.53682/fista.v2i2.139

[10] I. D. Alber, B. F. T. Kiono, and U. Harmoko, “Analisa Efisiensi Isentropik Turbin Pada

Pembangkit Listrik Tenaga Uap,” vol. 7, no. 09, 2022, https://doi.org/10.36418/syntaxliterate.v7i9.13532.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 3 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

ANALISIS EFISIENSI TURBIN UAP SHINCO BERDAYA 4000 KW DI PABRIK GULA DJOMBANG BARU. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(3), 2498-2505. https://doi.org/10.29407/ncxxcv08