PERHITUNGAN DAYA MESIN PENCACAH SERBAGUNA KAPASITAS 200 KG/JAM

Authors

  • Muhanad Fizzal Fauzzi Universitas Nusantara PGRI Kediri Indonesia
  • Haris Mahmudi Universitas Nusantara PGRI Kediri Indonesia

DOI:

https://doi.org/10.29407/m8gtq047

Abstract

Penelitian ini dilakukan untuk mengatasi rendahnya efisiensi proses pencacahan rumput pada peternakan skala kecil hingga menengah yang masih dilakukan secara manual. Tujuan penelitian adalah menganalisis kebutuhan daya mesin pencacah rumput serbaguna dengan kapasitas dua ratus kilogram per jam agar kinerja mesin optimal. Metode yang digunakan meliputi pendekatan eksperimental melalui pengujian langsung serta analisis teknik berdasarkan perhitungan mekanika dan sistem transmisi. Hasil penelitian menunjukkan bahwa kebutuhan daya mesin dipengaruhi oleh kesesuaian antara kecepatan putar torsi dan sistem transmisi. Diperoleh kebutuhan daya total sekitar lima koma delapan kilowatt dengan putaran optimal sekitar tujuh ratus delapan puluh satu koma delapan rpm. Penelitian ini menegaskan pentingnya analisis kebutuhan daya untuk meningkatkan efisiensi dan keandalan mesin pencacah rumput.

Keywords:

grass chopper, livestock feed, machine power

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] B. Y. Nugroho, ―Rancang Bangun dan Analisis Statik Mesin Pencacah Rumput

Kapasitas 5 HP untuk Meningkatkan Produksi Pakan Ternak,‖ vol. 4, no. 1, pp. 15–22,

2025, doi: https://doi.org/10.58991/rcd2kk75.

[2] A. A. Wirayuda and H. Istiqlaliyah, ―Perhitungan Daya Mesin Chopper Universal

Kapasitas 60 kg / menit dengan Aplikasi Model Pisau Gerigi,‖ vol. 9, pp. 249–255, doi:

https://doi.org/10.29407/rqxmkv32.

[3] F. Susilo and A. Sugianto, ―Analisa Perhitungan Daya Mesin Chopper Two In One,‖

vol. 8, pp. 650–659, 2024, doi: https://doi.org/10.29407/inotek.v8i2.4943.

[4] H. Mahmudi, ―Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin

Pencacah,‖ J. Mesin Nusant., vol. 4, no. 1, pp. 40–46, 2021, doi:

10.29407/jmn.v4i1.16201.

[5] A. A. SHELEMO, ―RANCANG BANGUN TRANSMISI DAYA PADA MESIN

ASAH DATAR,‖ Nucl. Phys., vol. 13, no. 1, pp. 104–116, 2023, doi:

https://doi.org/10.29407/inotek.v7i2.3481.

[6] S. A. Goni and M. M. Ilham, ―Rancang Bangun Pemindah Daya Mesin Pengupasdan

Penghalus Kulit Kacang Tanah Kapasitas 5 Kg/Jam,‖ Agustus, vol. 7, pp. 2549–7952,

2023.

[7] A. Sasmita, Y. Yohanes, and A. R. Widyanto, ―Pengaruh waktu operasi dan daya mesin

diesel dongfeng r175 berbahan bakar oli bekas terhadap emisi CO, CO2, HC, dan

opasitas,‖ Din. Tek. Mesin, vol. 11, no. 2, p. 124, 2021, doi: 10.29303/dtm.v11i2.440.

[8] F. Mananoma, A. Sutrisno, and S. Tangkuman, ―PERANCANGAN POROS

TRANSMISI DENGAN DAYA 100 HP,‖ vol. 6, pp. 1–9.

[9] Ahcmad Sammy Winarko, Muslimin Ilham, ―Rancang Bangun Transmisi Daya

Perajang Talas Kapasitas 60 Kg / Jam,‖ vol. 8, pp. 849–855, 2024.

[10] A. Tohasan, M. Y. Ependi, and A. Hermawan, ―Design of Horizontal Mixer Capacity of

15 Kilograms,‖ Mestro J. Tek. Mesin dan Elektro, vol. 3, no. 01, pp. 23–30, 2021, doi:

10.47685/mestro.v4i01.383.

[11] Revi Yando Sembiring, ―RANCANG BANGUN MIXER DENGAN TIGA SUMBU

KAPASITAS 4 LITER/PROSES,‖ J. Japan Weld. Soc., vol. 91, no. 5, pp. 328–341,

2022, doi: 10.2207/jjws.91.328.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 3 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

PERHITUNGAN DAYA MESIN PENCACAH SERBAGUNA KAPASITAS 200 KG/JAM. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(3), 2348-2355. https://doi.org/10.29407/m8gtq047