Analisis Kebutuhan Daya Pada Mesin Pengaduk Kompos Kapasitas 200 Kg/Jam
DOI:
https://doi.org/10.29407/zx7vrf13Abstract
Penelitian ini bertujuan menentukan kebutuhan daya dan torsi pada mesin pengaduk kompos berkapasitas 200 kg/jam yang digunakan untuk mencampur kotoran kambing, bahan organik, dan molase. Metode penelitian dilakukan melalui observasi lapangan, studi literatur, serta perhitungan teoritis terhadap sistem transmisi yang meliputi motor diesel, pulley, V-belt, dan gearbox. Hasil perhitungan menunjukkan bahwa gaya yang bekerja pada pengaduk sebesar 2.009 N dengan torsi pengaduk 642,88 Nm. Sistem transmisi menggunakan perbandingan pulley 1:3 dan gearbox rasio 1:30 sehingga mampu menurunkan putaran motor diesel dari 2.600 rpm menjadi 29 rpm pada poros pengaduk. Kebutuhan daya mesin setelah faktor koreksi beban diperhitungkan sebesar 5.855,1 W atau setara 7,9 PK, dengan torsi akhir pada poros pengaduk mencapai 1.971 Nm. Hasil penelitian menunjukkan bahwa konfigurasi tersebut mampu menghasilkan proses pengadukan yang efektif, stabil, dan efisien..
Keywords:
Daya, Torsi, Mesin Pengaduk Kompos, Transmisi Daya, Motor Diesel##plugins.themes.default.displayStats.downloads##
References
[1] A. B. Indraloka, K. Meidayanti, and I. N. Ratri, "Peningkatan Nilai Tambah Limbah Kotoran Kambing Menjadi Pupuk Kotoran Hewan di BPP Genteng Kabupaten Banyuwangi," J. ABDINUS J. Pengabdi. Nusant., vol. 7, no. 1, pp. 196-203, 2023, doi: 10.29407/ja.v7i1.18578.
[2] R. Cahyono, "Perancangan Mesin Pengaduk Tepung Tipe Horizontal Dengan Menggunakan Motor Listrik Sebagai Penggerak Dan Pulley Sebagai Putaran Daya," J. Renew. Energy Mech., vol. 1, no. 02, pp. 48-67, 2018, doi: 10.25299/rem.2018.1.
[3] H. Saputro and H. Mahmudi, "Perancangan Kebutuhan Daya Mesin Chopper & Mixer Berkapasitas 200 Kg/Jam," Semnas Inotek, vol. 9, no. 1, pp. 351-359, 2025, doi: 10.29407/tq3asy63.
[4] Suhartoyo, "Rekayasa Mesin Pengaduk Untuk Pembuatan Pupuk Kandang Kotoran Sapi Guna Meningkatkan Kesejahteraan UKM Peternak Sapi," Panrannuangku J. Pengabdi. Masy., vol. 1, no. 2, pp. 63-70, 2021, doi: 10.35877/panrannuangku481.
[5] A. H. Atienza, I. K. Erinco, M. B. Martinez, and V. J. Visande, "Dual grinding and mixing machine for vermicompost and worm biomass production," IOP Conf. Ser. Earth Environ. Sci., vol. 765, no. 1, 2021, doi: 10.1088/1755-1315/765/1/012067.
[6] H. W. Handani, S. R. Sulistiyanti, Y. Yulianti, P. Manurung, and J. Junaidi, "Rancang Bangun Mesin CNC Laser 4 Axis menggunakan Motor Stepper Tipe Nema 23 Terintergrasi Mach3 USB untuk Aplikasi Mesin Cutting Otomatis," J. Teor. dan Apl. Fis., vol. 13, no. 02, pp. 13-22, 2025, doi: 10.23960/jtaf.v13i02.413.
[7] Budi Basuki, Andhi Akhmad Ismail, Sugiyanto, Dani Anggoro Hasan, and Muhammad Alif, "Perancangan Mekanisme Pengaduk Kompos Sampah Organik dengan CAD/CAE," J. Engine Energi, Manufaktur, dan Mater., vol. 8, no. 2, pp. 200-205, 2024, doi: 10.30588/jeemm.v8i2.2000.
[8] A. Bain et al., "Optimalisasi Usaha Peternakan Kambing Melalui Teknologi Pengolahan Limbah Peternakan untuk Meningkatkan Pendapatan Peternak Kambing di Kota Kendari," Media Kontak Tani Ternak, vol. 3, no. 1, p. 21, 2021, doi: 10.24198/mktt.v3i2.32096.
[9] R. Bulan, A. Sitorus, and Ruslan, "Effect of the compost mixer machine on the quality of compost made from shredded oil palm fronds (OPF)," IOP Conf. Ser. Earth Environ. Sci., vol. 644, no. 1, 2021, doi: 10.1088/1755-1315/644/1/012077.
[10] J. Liang, X. Zhan, Y. Yang, X. Li, and T. Shi, "A numerical investigation of the effects of blade's geometric parameters on the power consumption of the twin-blade planetary mixer," Adv. Mech. Eng., vol. 8, no. 10, pp. 1-12, 2016, doi: 10.1177/1687814016672121.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
