Analisis Total Productive Maintenance dengan Metode Overall Equipment Effectiveness pada Mesin Pengayak Pasir
DOI:
https://doi.org/10.29407/707y7709Abstract
Penelitian ini membahas pentingnya penerapan Total Productive Maintenance (TPM) dalam meningkatkan efektivitas mesin pengayak pasir yang berperan penting dalam proses pemisahan material sesuai dengan kebutuhan size yang ditentukan. Pendekatan yang digunakan dalam penelitian adalah pendekatan kuantitatif dengan mengukur nilai Overall Equipment Effectiveness (OEE) untuk mengevaluasi kinerja mesin pengayak berdasarkan tiga aspek utama yaitu availability, performance dan quality rate. Hasil penelitian secara keseluruhan menunjukkan bahwa nilai OEE berada di atas standar Japan Institute of Plant Maintenance (JIPM) sebesar 85%, dengan masing-masing komponen utama diatas 90%. Hal ini menunjukkan bahwa mesin pengayak berada dalam kondisi efektif dan stabil selama Januari hingga Maret 2026. Total Productive Maintenance (TPM) yang diterapkan juga terbukti mampu menjaga performa mesin secara optimal sehingga minim terjadi gangguan atau kegagalan. Hasil ini menunjukkan bahwa pendekatan ini penting untuk dilakukan sebagai dasar dalam mengevaluasi perawatan berbasis data untuk meningkatkan ketersediaan dan keandalan alat-alat industri.
Keywords:
mesin pengayak, perawatan, total productive maintenance##plugins.themes.default.displayStats.downloads##
References
[1] Soesatijono and M. Darsin, "Literature Studies on Maintenance Management," JEMMME (Journal Energy, Mech. Mater. Manuf. Eng., vol. 6, no. 1, pp. 67-74, 2021, doi: 10.22219/jemmme.v6i1.12571.
[2] T. O. Alamri and J. P. T. Mo, "Optimisation of Preventive Maintenance Regime Based on Failure Mode System Modelling Considering Reliability," Arab. J. Sci. Eng., vol. 48, no. 3, pp. 3455-3477, 2023, doi: 10.1007/s13369-022-07174-w.
[3] P. S. Nugroho and N. Fasa, "Analisis Total Productive Maintenance dengan Menggunakan Metode Overall Equipment Effectiveness pada Mesin Injection Molding di PT. DEF," J. Ilm. Tek. Ind., vol. 10, no. 1, pp. 56-64, 2026, doi: https://doi.org/10.37090/ctqz0r21.
[4] M. Romanssini, P. C. C. De Aguirre, L. Compassi-severo, and A. G. Girardi, "A Review on Vibration Monitoring Techniques for Predictive Maintenance of Rotating Machinery," Eng, pp. 1797-1817, 2023, doi: https://doi.org/10.3390/eng4030102.
[5] M. Moleda, B. Malysiak-Mrozek, W. Ding, V. Sunderam, and D. Mrozek, "From Corrective to Predictive Maintenance A Review of Maintenance Approaches for the Power Industry," Sensors, pp. 1-47, 2023, doi: https://doi.org/10.3390/s23135970.
[6] A. Benhanifia, Z. Ben Cheikh, P. M. Oliveira, A. Valente, and J. Lima, "Systematic Review of Predictive Maintenance Practices in the Manufacturing Sector," Intell. Syst. with Appl., vol. 26, pp. 1-17, 2025, doi: https://doi.org/10.1016/j.iswa.2025.200501.
[7] A. Syahabuddin, M. Yusuf, and M. Zulziar, "Analisis Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Ekstrusi di PT. Polymindo Permata," J. Ilm. Tek. dan Manaj. Ind., vol. 6, no. 1, pp. 42-50, 2023, doi: https://doi.org/10.32493/jitmi.v6i1.y2023.p42-50.
[8] M. Suryaprakash, M. G. Prabha, M. Yuvaraja, and R. V. R. Revanth, "Improvement of Overall Equipment Effectiveness of Machining Centre Using TPM," Mater. Today Proc., vol. 49, pp. 9348-9353, 2021, doi: https://doi.org/10.1016/j.matpr.2020.02.820.
[9] C. Jaqin, A. Rozak, and H. H. Purba, "Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle," Int. J. Eng., vol. 33, no. 11, pp. 2245-2251, 2020, doi: 10.5829/ije.2020.33.116.16.
[10] S. Rahayu and A. L. Miftahuddin, "Analisis Total Productive Maintenance Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Six Big Losses Pada Mesin Curing Tire Press di PT. XYZ," J. Optim. Syst. Ergon. Implement., vol. 3, no. 01, pp. 62-70, 2025.
[11] Y. Alexander, F. E. Putra, and P. A. Sari, "Implementation of Total Productive Maintenance on Frame Welding Machine Maintenance Using the Overall Equipment Effectiveness (OEE) Method at PT Electronics Components Indonesia," Int. J. Innov. Sci. Res. Technol., vol. 9, no. 6, 2024, doi: https://doi.org/10.38124/ijisrt/IJISRT24JUN909.
[12] H. Kurnia, A. P. Riandani, and T. Aprianto, "Jurnal Optimasi Sistem Industri Application of the Total Productive Maintenance to Increase the Overall Value of Equipment Effectiveness on Ventilator Machines," J. Optimasi Sist. Ind., vol. 22, no. 1, pp. 52-60, 2023, doi: 10.25077/josi.v22.nl.p52-60.2023.
[13] M. Ardi, A. Sutanto, and A. Susilawati, "Analysis of Effectiveness of Cut Size Line Machines Based on Total Productive Maintenance (TPM) and Analytical Hierarchy Process (AHP) - A Case Study," J. Ocean. Mech. Aerosp., vol. 67, no. 3, pp. 108-116, 2023, doi: 10.36842/jomase.v67i3.351.
[14] Y. Siswanto, T. Hidayat, and D. R. S. Budi, "Analisis Total Productive Maintenance Overall Equipment Effectiveness Moulding PMS Line," J. Teknol. dan Manaj., vol. 21, no. 2, pp. 153-162, 2023, doi: 10.52330/jtm.v21i2.127.
[15] Hernadewita et al., "Overall Equipment Effectiveness Analyse for Performance of CNC Milling Machine Operation," in IOP Conference Series: Materials Science and Engineering, 2019, pp. 1-8, doi: 10.1088/1757-899X/505/1/012139.
[16] F. Hayyin, S. Maulana, H. M. J. Adhiwikarta, and D. Surani, "Analisis TPM pada Mesin Milling Menggunakan Metode OEE: Studi Kasus di Salah Satu Jasa Konstruksi di Kota Cilegon," J. Inform. Manaj. dan Teknol., vol. 28, no. 1, pp. 155-162, 2026, doi: 10.23969/infomatek.v28i1.45283.
[17] A. Jabari, A. A. Fikri, and M. A. Mizar, "Adaptive Maintenance Strategy in Natural Stone Processing Industry: Integrating OEE-FMEA-Based Priority Matrix in the i-TPM-Lean+," J. Tek. Mesin Petra, vol. 22, no. 2, pp. 94-107, 2025, doi: https://doi.org/10.9744/jtm.22.2.94-107.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
