PERANCANGAN SISTEM TRANSMISI PADA MESIN CHOPPER KOMBINASI MIXER DAN PENCETAK PELLET

Authors

  • Moh Mukhlishul Fuadi Universitas Nusantara PGRI Kediri Indonesia
  • Mohammad Muslimin Ilham Universitas Nusantara PGRI Kediri Indonesia

DOI:

https://doi.org/10.29407/ap4ga306

Abstract

peningkatan produksi nanas di indonesia menghasilkan limbah batang dan daun nanas dalam jumlah besar dan belum di manfaatkann secara optimal. Dikelopok ternak Sempulur , Kecamatan Ngancar Kabupaten Kediri, limbah nanas tersebut telah digunakan sebagai pakan ternak dalam bentuk cacahan, namun memiliki kelemahan ukuran tidak seragam umur simpan yang lebih pendek, dan penurunan pelatabilitas akibat kelayuan bahan pakan. Penelitian ini bertujuan merancang sisitem transmisi pada mesin kombinasi chopper,miser dan pencetak pellet untuk mengolah limbah batang dan daun nanas menjadi pakan dalam bentuk pellet. Penelitian menggunakan metode perancangan (design research) melalui tahap observasi, studi literatur, perancangan sistem transmisi, perhitungan elemen mesin, fabrikasi, dan uji coba produk. Hasil perancangan tersebut menghasilkan sistem transmisi terintegrasi yang menggunakan motor yang menyalurkan daya ke tiga mesin tersebut sesuai kebutuhan putaran dan torsi masing-masing. Sistem transmisi dirancang sehingga mampu mendukung proses pengolahan limbah nanas menjadi pakan pellet secara efektif dan efisien.

Keywords:

Combination Machine, Transmission, Design of Chopper, Mixer, and Pellet Moulder

##plugins.themes.default.displayStats.downloads##

##plugins.themes.default.displayStats.noStats##

References

[1] P. K. Sarangi et al., ―Sust n l ut l z t on of p n ppl w st s for produ t on of

bioenergy, biochemicals and value- dd d produ ts: A r v w,‖ Bioresour. Technol., vol.

351, pp. 1–13, 2022, doi: 10.1016/j.biortech.2022.127085.

[2] S. A. M. Sukri et al., ―P n ppl w st n n m l f d: A r v w of nutr t on l pot nt l,

mp t nd prosp ts,‖ Annals of Animal Science, vol. 23, no. 2, pp. 339–352, 2023, doi:

10.2478/aoas-2022-0080.

[3] P. C. Nath et al., ―V lor z t on of Food W st s An m l F d: A St p tow rds

Sust n l Food W st M n m nt nd C r ul r B o onomy,‖ Animals, vol. 13, no.

1366, pp. 1–23, 2023, doi: 10.3390/ani13081366.

[4] E. A. G. P. W ks n nd H. Ist ql l y , ―P r n n n S st m Tr nsm s P d M s n

P r j n Lonton n K rupuk K p s t s 0k /J m,‖ n Prosiding SEMNAS INOTEK

(Seminar Nasional Inovasi Teknologi), 2023, pp. 911–918. [Online]. Available:

https://proceeding.unpkediri.ac.id/index.php/inotek/

[5] N. P. B lovn v, Y. I. Brovk n , nd L. A. Dm tr v , ―V-Belt Transmissions of

A r ultur l M n s,‖ Tractors and Agricultural Machinery, vol. 88, no. 3, pp. 31–36,

2021, doi: 10.31992/0321-4443-2021-3-31-36.

[6] H. M mud , ―An l s P r tun n Pull y d n V-Belt Pada Sistem Transmisi Mesin

P n ,‖ Jurnal Mesin Nusantara, vol. 4, no. 1, pp. 40–46, 2021, doi:

10.29407/jmn.v4i1.16201.

[7] F. N. C yono, R fky, nd Y. Nof ndr , ―P r n n n Al t P m u t P l t P k n T rnak

Port l ,‖ Metalik: Jurnal Manufaktur, Energi, Material Teknik, vol. 2, no. 2, pp. 68–74,

2022, doi: https://doi.org/10.22236/metalik.v2i2.13105.

[8] D. Ariwibowo and Sutrisno, ―Con ptu l D s n: A C s Study of Int r t d G r ox

and Pulley-Belt Syst m for F s F d P ll t z r,‖ International Journal of

Multidisciplinary Research and Analysis, vol. 08, no. 06, pp. 3490–3497, 2025, doi:

10.47191/ijmra/v8-i06-50.

[9] A. Qos m Asf y , A. Ak r, nd Y. S ndy Pr m st , ―P r n n n S st m P n r k

(Transmis D n Motor M s n P n t k K rupuk S m r Untuk UMKM,‖ n Seminar

Nasional Inovasi Teknologi) INOTEK, 2024, pp. 561–567. [Online]. Available:

https://proceeding.unpkediri.ac.id/index.php/inotek/

[10] M. Ilm , L. B. Yud , nd N. A. G. L st r , ―PADA MESIN PELET PAKAN TERNAK

JENIS VERTIKAL,‖ Journal Otoranpur, Perencanaan Sistem Penggerak Pada Mesin

Pelet, vol. 7, no. 1, pp. 8–12, 2026, doi: https://doi.org/10.54317/oto.v7i1.903.

Downloads

Published

2026-07-20

Issue

Vol. 10 No. 3 (2026): Prosiding Seminar Nasional Inovasi Teknologi Tahun 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

How to Cite

PERANCANGAN SISTEM TRANSMISI PADA MESIN CHOPPER KOMBINASI MIXER DAN PENCETAK PELLET. (2026). Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 10(3), 2064-2071. https://doi.org/10.29407/ap4ga306