PREDIKSI PRODUKSI BIOGAS TAHUNAN DENGAN PENDEKATAN SISTEM DINAMIK UNTUK OPTIMASI KAPASITAS SAMPAH TPAS TALANGAGUNG
DOI:
https://doi.org/10.29407/inotek.v1i1.432Abstract
TPAS Talangagung Kepanjen adalah salah satu TPAS yang memanfaatkan sampah menjadi biogas yang dapat digunakan untuk membangkitkan listrik ataupun sebagai bahan bakar memasak untuk penduduk sekitar. Namun pada tahun 2015 terjadi peningkatan hampir dua kali sampah yang masuk dibandingkan tahun sebelumnya, dimana jumlah volume sampah pada tahun 2014 sebanyak 46,558 m3 dan pada tahun 2015 meningkat menjadi 70,490 m3. Kondisi ini diprediksi akan terus meningkat dan akan menyebabkan volume sampah TPAS Talangagung melebihi kapasitas. Perlu adanya estimasi produksi biogas yang dapat dihasilkan oleh sampah pada TPAS Talangagung sebagai dasar keputusan dalam mengoptimasi sampah yang jumlahnya semakin bertambah. Pada penelitian ini diperoleh hasil prediksi yaitu sampah pada TPAS Talangagung dapat menghasilkan biogas sebanyak 45 m3/hari dalam satu zona/sel TPAS dan dapat memproduksi biogas selama hampir 20 tahun. Namun karena keterbatasan lahan dan peningkatan volume sampah, maka dalam satu zona/sel yang menghasilkan biogas dibawah 50% dianggap sebagai zona/sel non aktif, dan sampah dapat dikonversi menjadi pupuk organik maupun sebagai tempat penghijauan.
Keywords:
Optimasi Sampah, Prediksi Biogas, Sistem Dinamik, TPAS Talangagung##plugins.themes.default.displayStats.downloads##
References
P. F. E. Adipraja and M. Islamiyah, “Prediksi Volume Sampah TPAS Talangagung dengan Pendekatan Sistem Dinamik,” SMATIKA, vol. 6, no. 2, pp. 24–28, 2016.
DCKTR, Profil TPA Wisata Edukasi Talangagung Kepanjen Kabupaten Malang. Malang: Dinas Cipta Karya dan Tata Ruang, 2014.
H. A. Qdais, F. Abdulla, and L. Qrenawi, “Solid Waste Landfills as a Source of Green Energy: Case Study of Al Akeeder Landfill,” Jordan J. Mech. Ind. Eng., vol. 4, no. 1, pp. 69–74, 2010.
ATSDR, Landfill Gas Primer: An Overview for Environmental Health Professionals, no. November. Atlanta: Agency for Toxic Substances and Disease Registry, 2001.
J. Markovic and S. Stevovic, “The Process of Creation and Analysis of The Lanfill Gas From The Landfill in The Region of Pchinja,” J. Process. Energy Agric., vol. 20, no. 2, pp. 63–68, 2016.
G. P. Richardson, Encyclopedia of Operations Research and Management Science: System Dynamics. 2013.
C. Mgimba and A. Sanga, “Municipal Solid Waste Composition Characterization For Sustainable Management Systems In Mbeya City, Tanzania,” Int. J. Sci. Environ. Technol., vol. 5, no. 1, pp. 47–58, 2016.
R. Chandrappa and D. B. Das, “Solid Waste Management,” Environ. Sci. Eng., 2012.
B. A. Hakami and E. S. A. Seif, “Household Solid Waste Composition and Management in Jeddah City, Saudi Arabia: A planning model,” Int. Res. J. Environ. Sci., vol. 4, no. 1, pp. 1–10, 2015.
M. A. A. Samah, L. A. Manaf, A. Ahsan, W. N. A. Sulaiman, P. Agamuthu, and J. L. D’Silva, “Household Solid Waste Composition in Balakong City, Malaysia: Trend and Management,” Polish J. Environ. Stud., vol. 22, no. 6, pp. 1807–1816, 2013.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Philip Faster Eka Adipraja, Mufidatul Islamiyah, Ida Wahyuni

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License